Home › Forums › Support › How to set feature photo to width of site This topic has 7 replies, 3 voices, and was last updated 6 years, 9 months ago by Leo. Viewing 8 posts - 1 through 8 (of 8 total) Author Posts June 30, 2017 at 11:46 pm #342334 Gary I dont’ know what I am not doing. Have tried css filters, etc. but cant get feature photo wide enough to right side of site. Here is my url. Please note I also have the same problem on that page with the 3 photos at the bottom of the page, I want to space them evenly across the full width of the page. Thank you, Gary http://206.196.110.39/~innovati/wp-admin/customize.php?return=%2F~innovati%2Fwp-admin%2Fedit.php%3Fpost_type%3Dpage%26ids%3D2114# July 1, 2017 at 6:08 am #342417 TomLead Developer Lead Developer Hi there, That URL is for admins only. Can you link me to the live page? July 1, 2017 at 8:00 am #342456 Gary http://206.196.110.39/~innovati/ July 1, 2017 at 8:43 am #342471 LeoStaff Customer Support Hi there, It’s not full width because your featured image is too small: http://206.196.110.39/~innovati/wp-content/uploads/2017/07/test-pic-.jpg We can force it to be full width but you would lose the quality. Best to add an image big enough as your container width is 2000px. Let me know if this helps. July 1, 2017 at 9:08 am #342484 Gary What should the minimum size be? July 1, 2017 at 9:36 am #342492 LeoStaff Customer Support If your container size is 2000px then I would recommend at least 2000px. Anything less than that will need to get scaled up and lose its quality. July 1, 2017 at 9:45 am #342494 Gary thanks July 1, 2017 at 10:08 am #342503 LeoStaff Customer Support No problem! Author Posts Viewing 8 posts - 1 through 8 (of 8 total) You must be logged in to reply to this topic. Log In Username: Password: Keep me signed in Log In