- This topic has 9 replies, 5 voices, and was last updated 5 years, 4 months ago by
.
-
Posts
-
hi, I’ve created a container with two grids on top of each other inside. I want the top grid aligned to the top of the container and the bottom grid to the bottom with the following css:
.container{
display: flex;
align-content: space-around;
height: 100vh;
}but the align content isn’t working.
but when I inspect the element, I see there is an “gb-inside-container”. How do I align the bottom grid to the bottom of the container?Customer Support
Hi there,
Any chance you can link us to the site in question?
You can use the private information field.
Let me know 🙂
here it is 😉
You shouldn’t need CSS for that – I just tested and it should work like this:
https://www.screencast.com/t/cnxIU5dTYlLooks like you are adding some unnecessary grids – make sure your block navigation looks like this:
https://www.screencast.com/t/qKlN1Pp2lA6hHi Leo,
It’s still not working for me. To clarify, see images. I want the bottom grid (red) to align to the bottom of the container and the top grid align to the top.
https://ibb.co/7NjH6v3 = container with top grid and bottom grid (red)
https://ibb.co/2chKbhz = bottom grid
https://ibb.co/F6RM8ZP = top gridNot sure if I fully understand.
You are trying to move the Go to Approach to align with the bottom of the image?
yes thats exactly what I’m trying 😉
Customer Support
Hi Joost,
To achieve what you are looking for, it’s best to build the structure with GB as the screenshot below:
https://tinyurl.com/y852r2wcAnd set the Horizontal Gap of grid to 0, Vertical Gap of grid to 0, Vertical Alignment to top.
https://tinyurl.com/yaedpbfxLet me know 🙂
¿DONDE PUEDES ABRIR UN TEMA O TENER CONTACTO CON SOPORTE TÈCNICOS DE GENERATEPRESS?
Customer Support
Hi @Jose Gilberto,
¿DONDE PUEDES ABRIR UN TEMA O TENER CONTACTO CON SOPORTE TÈCNICOS DE GENERATEPRESS?
You can open a new topic here for any technical concerns or you can contact us through our Contact us page here: https://generatepress.com/contact/
- You must be logged in to reply to this topic.
