[Support request] Featured Image

Home Forums Support [Support request] Featured Image

Home Forums Support Featured Image

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • #748802
    Sergei

    Hey!I have some bug. In customize i put my featured image width and height, and put it in left side. But it still showing in center, same like with right side. When use auto width and auto height then picture goes bigger and stay in left side. Really don’t know where is the problem. Using Article theme.

    #748918
    Leo
    Staff
    Customer Support

    Hi there,

    Are you referring to the home page?

    #749103
    Sergei

    No, it’s just blog i make page like news.

    #749104
    Leo
    Staff
    Customer Support

    Can you guide me to the page in question?

    #749107
    Sergei

    This page! When i make this image smaller then i cant get it in the left side, image still centered. When use auto/auto then it’s position is normal to the left.

    #749113
    Leo
    Staff
    Customer Support

    Not quite sure if I understand still. It’s on the left side from what I can see:
    https://www.screencast.com/t/ua1QEbwpqEV

    #749115
    Sergei

    Now i put 300/300 and left side, just check again.

    #749119
    Leo
    Staff
    Customer Support
    #749121
    Sergei

    I need it closer to the left side under the text. But i think then i need 3 columns? Because im now use 2. What will be the best sizes for featured image?

    #749146
    Leo
    Staff
    Customer Support

    I’m not quite sure what layout you are trying to achieve.

    Might be best to add some more test posts so you can see the overall effects?

    There isn’t a recommended size for featured images.

    #749158
    Sergei

    Ok Leo. I will try to make more posts and check what happen. Thank you for now.

    #749187
    Leo
    Staff
    Customer Support

    Sounds good. I’ll leave the topic open. Just let me know when you need another look 🙂

Viewing 12 posts - 1 through 12 (of 12 total)
  • You must be logged in to reply to this topic.